KiwiLink Microwave Link
Acres electronics are pleased to announce the prototype of our new 2.4/1.2Ghz microwave link. We have tried to incorporate as many desirable features as we can into a low cost unit.

Both the Tx and Rx feature interchangable reflectors/aerials. On 2.4Ghz the choice is 15, 19 and 24db gain and on 1.2Ghz an attached yagi giving 14.2db gain.

All our 2.4Ghz units can be ordered to cover the NZ "O" band.

Features
• Back porch clamping
• Video AGC
• Full sync and burst regeneration
• Selectable time base correction
• Selectable sync response time
• Built in colour bar generator
• 600 ohm balanced audio
• Two XLR connectors
• Two audio subcarriers 6Mhz and 6.5 Mhz
• BNC video in/out
• 12v operation (4 pin XLR)
• On 2.4Ghz power will be 30mw or 200mw
• On 1.2Ghz power will be 50mw
• O band frequencies for 2.4Ghz available
• Tx/Rx feature CCIR 405 pre-emphasis and de-emphasis

Mechanical Details
• The units can be pole mounted with full pan and tilt facilities.
• When tripod mounted the attachments for the pole mount can be stored inside the case.
• Space is provided in a cage at the rear of the unit to fit a 12v 7.2ah battery.
• All connectors are mounted in a channel under the unit
• Although prototype shows side panel attaced with numerous bolts, the production units will have 2 quick-release screws for speedy access.
• Higher RF power can be made to order

Price: NZ$4000 plus GST (non-diversity reception)

<< Back to main products page